Z-Wave Four Button Controller

This custom iblinds Z-wave Plus Four-Button Scene Controller is a battery-powered remote manufactured by Hank. Using a Z-Wave hub you can control multiple devices within a network by just pressing the buttons. It's programmable so that you can always program the button controller based on your needs. You can control up to 4 scenes with a single remote. 

Works With
Fibaro Home Center Lite
Home Assistant
HomeSeer
Hubitat
OpenHAB
SmartThings Hub - (custom device handler required)   
VeraEdge
VeraPlus
VeraSecure

Specifications
Wireless coverage: >30m indoor                   
Z-wave frequency:908.42MHz      
Size: 50 x 50 x 15.5mm                                           
Powered by: LIR2450 (Rechargeable)

Features
Support four separate scenes
Rechargeable battery powered                                                                         
FCC and Z-Wave Plus certified 

Installation
To set up your 4-Button Scene Controller, start by opening the cover and inserting the included battery. Make sure to close the cover tightly. Put your Z-Wave hub into inclusion/pairing mode (see you hub’s manual if you’re unsure how to initiate inclusion mode). Press the Z-Button on the device 3 times quickly. Once the device is included, the LED indicator will blink blue for 5 seconds and then remain on for another 15 seconds.

If your hub supports secure inclusion, you’ll be able to add the 4-Button Scene Controller as a secure device. After inserting the battery, put you hub into inclusion/pairing mode. Press and hold the Z-Button for 3 seconds. Once the device is included, the LED indicator will blink green for 5 seconds and then remain on for another 15 seconds.